Salta al contenuto principale
Aiuto

iPad 3 Wi-Fi Headphone Jack Cable Replacement

Solo Prerequisita

Solo Prerequisita

Per favore tieni conto che questa guida è solo un prerequisito per altre guide.

Internal prereq.

Internal prereq.

Strumenti

Passo 1 Headphone Jack Cable  ¶ 

Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector. Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board. Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

Passo 1 Headphone Jack Cable  ¶ 

  • Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

  • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

Passo 2  ¶ 

Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame. Pull the headphone jack assembly cable straight out of its socket on the logic board.

Passo 2  ¶ 

  • Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.

  • Pull the headphone jack assembly cable straight out of its socket on the logic board.