Salta al contenuto principale
Aiuto

Dell Inspiron 15R SE 7520 Hard Drive Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: Terrence15
  • Stima il tempo: 5 - 7 minuti
  • Difficoltà: Facile

In this guide, we will be showing you how to remove and replace the Hard Drive.

Passo 1 Remove the Screws  ¶ 

WARNING:  Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin".

Passo 1 Remove the Screws  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin".

  • Remove the screws that secure the hard-drive assembly to the computer base.

Passo 2 Sliding the Hard Drive  ¶ 

Using the pull-tab, slide the hard-drive assembly toward the back of the computer to disconnect the hard-drive assembly from the connector on the system board.

Passo 2 Sliding the Hard Drive  ¶ 

  • Using the pull-tab, slide the hard-drive assembly toward the back of the computer to disconnect the hard-drive assembly from the connector on the system board.

Passo 3 Lifting the Hard-Drive Assembly  ¶ 

Lift the hard-drive assembly out of the computer base.

Passo 3 Lifting the Hard-Drive Assembly  ¶ 

  • Lift the hard-drive assembly out of the computer base.

Passo 4 Remove the Screws  ¶ 

Remove the screws that secure the hard-drive bracket to the hard drive.

Passo 4 Remove the Screws  ¶ 

  • Remove the screws that secure the hard-drive bracket to the hard drive.

Passo 5 Lifting the Hard Drive  ¶ 

Lift the hard drive off the hard-drive bracket. Lift the hard drive off the hard-drive bracket.

Passo 5 Lifting the Hard Drive  ¶ 

  • Lift the hard drive off the hard-drive bracket.

Passo 6 Align the Screw Holes  ¶ 

Align the screw holes on the hard drive-bracket with the screw holes on the NEW hard drive.

Passo 6 Align the Screw Holes  ¶ 

  • Align the screw holes on the hard drive-bracket with the screw holes on the NEW hard drive.

Passo 7 Replace the Screws  ¶ 

Replace the screws that secure the hard-drive bracket to the hard drive.

Passo 7 Replace the Screws  ¶ 

  • Replace the screws that secure the hard-drive bracket to the hard drive.

Passo 8 Place the Hard-Drive Assembly  ¶ 

Place the hard-drive assembly on the computer base.

Passo 8 Place the Hard-Drive Assembly  ¶ 

  • Place the hard-drive assembly on the computer base.

Passo 9 Sliding the Hard Drive Assembly  ¶ 

Using the pull-tab, slide the hard-drive assembly toward the front of the computer, to connect the hard-drive assembly to the connector on the system board.

Passo 9 Sliding the Hard Drive Assembly  ¶ 

  • Using the pull-tab, slide the hard-drive assembly toward the front of the computer, to connect the hard-drive assembly to the connector on the system board.

Passo 10 Replace the Screws  ¶ 

Replace the screws that secure the hard-drive assembly to the computer base.

Passo 10 Replace the Screws  ¶ 

  • Replace the screws that secure the hard-drive assembly to the computer base.