Salta al contenuto principale
Aiuto

Dell Inspiron 15 7579 2-in-1 Display Assembly Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: Terrence15
  • Stima il tempo: 5 - 10 minuti
  • Difficoltà: Moderato

In this guide, we will be showing you how to remove and replace the Display Assembly.

Passo 1 Turn the Computer Over  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Passo 1 Turn the Computer Over  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Turn the computer over and open the display to 180-degree angle.

  • CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

Passo 2 Place the Computer  ¶ 

Place the computer on a flat surface with the display facing down.

Passo 2 Place the Computer  ¶ 

  • Place the computer on a flat surface with the display facing down.

Passo 3 Remove the Screws  ¶ 

Remove the screws that secure the display assembly to the palm-rest assembly.

Passo 3 Remove the Screws  ¶ 

  • Remove the screws that secure the display assembly to the palm-rest assembly.

Passo 4 Lifting the Display Assembly  ¶ 

Lift the display assembly off the palm-rest assembly.

Passo 4 Lifting the Display Assembly  ¶ 

  • Lift the display assembly off the palm-rest assembly.

Passo 5 Align the Screw Holes  ¶ 

With the display facing down, align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Passo 5 Align the Screw Holes  ¶ 

  • With the display facing down, align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Passo 6 Replace the Screws  ¶ 

Replace the screws that secure the NEW display assembly to the palm-rest assembly.

Passo 6 Replace the Screws  ¶ 

  • Replace the screws that secure the NEW display assembly to the palm-rest assembly.

Passo 7 Turn the Computer Over  ¶ 

Nessuna immagine

Passo 7 Turn the Computer Over  ¶ 

  • Turn the computer over and close the display.