Salta al contenuto principale
Aiuto

Dell Inspiron 14z 1470 Hard Drive Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: Terrence15
  • Stima il tempo: 9 - 30 minuti
  • Difficoltà: Moderato

In this guide, we will be showing you how to remove and replace the Hard Drive.

Passo 1 Disconnecting the Audio Cable  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

Passo 1 Disconnecting the Audio Cable  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

  • Disconnect the USB/audio cable from the system board.

Passo 2 Remove the Screws  ¶ 

Remove the four screws that secure the hard drive assembly to the computer base.

Passo 2 Remove the Screws  ¶ 

  • Remove the four screws that secure the hard drive assembly to the computer base.

Passo 3 Lifting the Hard Drive Assembly  ¶ 

Slide and lift the hard drive assembly out of the computer base.

Passo 3 Lifting the Hard Drive Assembly  ¶ 

  • Slide and lift the hard drive assembly out of the computer base.

Passo 4 Remove the Screws  ¶ 

Remove the four screws that secure the hard drive to the hard drive bracket.

Passo 4 Remove the Screws  ¶ 

  • Remove the four screws that secure the hard drive to the hard drive bracket.

Passo 5 Remove the Hard Drive  ¶ 

Remove the hard drive.

Passo 5 Remove the Hard Drive  ¶ 

  • Remove the hard drive.

Passo 6 Placing the Hard Drive  ¶ 

Place the NEW hard drive in the hard drive bracket and replace the four screws that secure the hard drive bracket to the hard drive.

Passo 6 Placing the Hard Drive  ¶ 

  • Place the NEW hard drive in the hard drive bracket and replace the four screws that secure the hard drive bracket to the hard drive.

Passo 7 Sliding the Hard Drive  ¶ 

Slide the hard drive assembly into the computer base until it is fully seated.

Passo 7 Sliding the Hard Drive  ¶ 

  • Slide the hard drive assembly into the computer base until it is fully seated.

Passo 8 Replace the Screws  ¶ 

Replace the four screws that secure the hard drive assembly to the computer base.

Passo 8 Replace the Screws  ¶ 

  • Replace the four screws that secure the hard drive assembly to the computer base.

Passo 9 Connecting the Cable  ¶ 

Connect the USB/audio cable to the USB/audio board.

Passo 9 Connecting the Cable  ¶ 

  • Connect the USB/audio cable to the USB/audio board.