Salta al contenuto principale
Aiuto

CMT-CP1 Rotary encoder cleaning/replacing

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Here I fix the rotary encoder volume control. This is a common problem they get dirty and become erratic.

Here I fix the rotary encoder volume control. This is a common problem they get dirty and become erratic.

Passo 1 remove cover  ¶ 

Remove the screws Remove the screws

Passo 1 remove cover  ¶ 

  • Remove the screws

Passo 2 remove flex cables  ¶ 

Remove the flex cables with easy access

Passo 2 remove flex cables  ¶ 

  • Remove the flex cables with easy access

Passo 3 remove screws  ¶ 

Remove the screws on both sides and on the bottom Remove the screws on both sides and on the bottom

Passo 3 remove screws  ¶ 

  • Remove the screws on both sides and on the bottom

Passo 4 remove more cables  ¶ 

Remove the front and the rest of the cables

Passo 4 remove more cables  ¶ 

  • Remove the front and the rest of the cables

Passo 5 remove cassette deck  ¶ 

Remove the cassette deck (this is to access the screw beneath it) Remove the cassette deck (this is to access the screw beneath it)

Passo 5 remove cassette deck  ¶ 

  • Remove the cassette deck (this is to access the screw beneath it)

Passo 6 remove pcb  ¶ 

Remove the screws (you have to remove the casetdeck to access the orange screw)

Passo 6 remove pcb  ¶ 

  • Remove the screws (you have to remove the casetdeck to access the orange screw)

Passo 7 remove knob  ¶ 

Remove the volume knob and the screw behind it Remove the volume knob and the screw behind it

Passo 7 remove knob  ¶ 

  • Remove the volume knob and the screw behind it

Passo 8 remove more screws  ¶ 

Remove the screws

Passo 8 remove more screws  ¶ 

  • Remove the screws

Passo 9 lift up one side  ¶ 

carefully lift up one side of the cassette deck and remove the pcb

Passo 9 lift up one side  ¶ 

  • carefully lift up one side of the cassette deck and remove the pcb

Passo 10 open the rotary encoder  ¶ 

Remove the taps to the side carefully

Passo 10 open the rotary encoder  ¶ 

  • Remove the taps to the side carefully

Passo 11 clean the rotary encoder  ¶ 

clean up your rotary encoder with a screwdriver, also the inside! clean up your rotary encoder with a screwdriver, also the inside! clean up your rotary encoder with a screwdriver, also the inside!

Passo 11 clean the rotary encoder  ¶ 

  • clean up your rotary encoder with a screwdriver, also the inside!