Salta al contenuto principale
Aiuto

Tecnica: Install firmware on Xbox One S

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

This guide will show you how to install official XBox One firmware on a blank HDD or SSD.

  • Autore: KimJongIan
  • Stima il tempo: 30 minuti - 1 ora
  • Difficoltà: Difficile

Guide created by KimJongIan

With help by iFixit users Andrew and MervDervis

This guide would not be possible without the script made by user tai1976 from gbatemp.net

Passo 1 Warning  ¶ 

Before doing any updates or software changes with the Hard Drive connected to the motherboard, make sure that all connections  to the board are secure, such as the disc drive, otherwise you will brick the Motherboard, and will require a new one.

Passo 1 Warning  ¶ 

  • Before doing any updates or software changes with the Hard Drive connected to the motherboard, make sure that all connections to the board are secure, such as the disc drive, otherwise you will brick the Motherboard, and will require a new one.

Passo 2 Prerequisites  ¶ 

Before beginning this guide, it is best to read through the steps for the hardware portion, as shown by iFixit user Andrew, at the following link.

Passo 2 Prerequisites  ¶ 

  • Before beginning this guide, it is best to read through the steps for the hardware portion, as shown by iFixit user Andrew, at the following link.

  • Xbox One S Hard Drive Replacement

  • You will also need a PC running Windows, and a hard drive reader (Sata Data and Sata Power to USB)

  • Seagate drives have been known to cause issues with XBox One software.

Passo 3 Connect Your New HDD  ¶ 

Connect the new hard drive to the PC. Make sure that the HDD is in a location where it will not be accidentally disconnected.

Passo 3 Connect Your New HDD  ¶ 

  • Connect the new hard drive to the PC. Make sure that the HDD is in a location where it will not be accidentally disconnected.

Passo 4 Download the Script  ¶ 

This process requires you to run a script to partition the HDD/SSD.

Passo 4 Download the Script  ¶ 

Passo 5 Open Command Prompt as Admin  ¶ 

Press the Windows key/Start menu and type in "CMD", right click, and select 'Run as Administrator"

Passo 5 Open Command Prompt as Admin  ¶ 

  • Press the Windows key/Start menu and type in "CMD", right click, and select 'Run as Administrator"

  • Type the command "cd C:\Users\(Your Name)\Downloads\xboxonehdd-master-6.1\xboxonehdd-master\win"

  • Replace (Your name) with the name of your user profile.

Passo 6 Run the Batch File  ¶ 

Run the command "create_xbox_drive"

Passo 6 Run the Batch File  ¶ 

  • Run the command "create_xbox_drive"

  • The next steps are to create a drive that has either 500GB, 1TB, or 2TB storage. If at anytime you get confused, there is a readme file in the folder you extracted that can help out as well.

Passo 7 Follow the On Screen Instructions  ¶ 

For this tutorial, we are using the first option (a) Replace/Upgrade w/o a working original drive. For this tutorial, we are using the first option (a) Replace/Upgrade w/o a working original drive.

Passo 7 Follow the On Screen Instructions  ¶ 

  • For this tutorial, we are using the first option (a) Replace/Upgrade w/o a working original drive.

Passo 8 Follow (continued)  ¶ 

Make sure to choose the right drive to format, Disk 0 is almost always your operating system, DO NOT CHOOSE DISK 0. It will ask you to confirm your selection. Then you will need to choose the size of the drive you have created.

Passo 8 Follow (continued)  ¶ 

  • Make sure to choose the right drive to format, Disk 0 is almost always your operating system, DO NOT CHOOSE DISK 0.

  • It will ask you to confirm your selection.

  • Then you will need to choose the size of the drive you have created.

Passo 9 The Command is Complete.  ¶ 

Once the command line displays 6 lines of long numbers with "GUID" at the top, the command lines is finished.

Passo 9 The Command is Complete.  ¶ 

  • Once the command line displays 6 lines of long numbers with "GUID" at the top, the command lines is finished.

  • If this doesn't work, clean the disk with diskpart, link below, and try again.

  • http://knowledge.seagate.com/articles/en...

Passo 10 Download the Firmware  ¶ 

You need to go to the XBox official site and download a file called OSU 1. https://support.xbox.com/en-US/xbox-one/... Select "I need to update my console offline"

Passo 10 Download the Firmware  ¶ 

  • You need to go to the XBox official site and download a file called OSU 1.

  • https://support.xbox.com/en-US/xbox-one/...

  • Select "I need to update my console offline"

  • Select "Xbox One S or Xbox One X"

  • Click the green link "OSU1" to start the download.

Passo 11 Copy files  ¶ 

Navigate to the System Update (X) drive, and create 2 folders, one labeled "A" and one "B" Extract all of the files from OSU1, and copy everything in $SystemUpdate, except for "updater.xvd" Paste these files in the folders "A" and "B" that you created.

Passo 11 Copy files  ¶ 

  • Navigate to the System Update (X) drive, and create 2 folders, one labeled "A" and one "B"

  • Extract all of the files from OSU1, and copy everything in $SystemUpdate, except for "updater.xvd"

  • Paste these files in the folders "A" and "B" that you created.

  • Copy "updater.xvd" from $SystemUpdate and paste it in the root of System Update (X)

Passo 12 Put the Hard Drive in the XBox  ¶ 

Safely eject the media and put it back into the XBox

Passo 12 Put the Hard Drive in the XBox  ¶ 

Passo 13 Reset console  ¶ 

Some users have experienced sign in issues after an ssd upgrade. If this occurs, simply reset the console (keep games and apps if need be.) and that should resolve the issue.

Passo 13 Reset console  ¶ 

  • Some users have experienced sign in issues after an ssd upgrade. If this occurs, simply reset the console (keep games and apps if need be.) and that should resolve the issue.

  • Those who have their Xbox set to "energy saving" mode for startup may experience a 20-30 second black screen before boot. Changing this setting to "instant on" resolves this issue.

  • Now enjoy 20x faster r/w speeds and loading times a fraction that of a standard HDD.

Passo 14 You are Finished  ¶ 

You are now finished, enjoy your XBox!

Passo 14 You are Finished  ¶ 

  • You are now finished, enjoy your XBox!

  • Note: This does work with Solid State Drives.