Salta al contenuto principale
Aiuto

Dell Inspiron 13z 5323 Memory Module Replacement

Prerequisite Mancanti

Prerequisite Mancanti

A questa guida mancano informazioni su come avviare la procedura. Fai una guida prerequisita!

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: Terrence15
  • Stima il tempo: 50 secondi - 4 minuti
  • Difficoltà: Facile

In this guide, we will show you how to remove and replace the Memory Module.

Passo 1 Popping up the Memory Module  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin".

Passo 1 Popping up the Memory Module  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin".

  • CAUTION: To prevent damage to the memory-module connector, do not use tools to spread the memory-module securing clips.

  • Close the display and turn the computer over.

  • Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.

Passo 2 Removing the Memory Module  ¶ 

Remove the memory module from the memory-module connector. Remove the memory module from the memory-module connector.

Passo 2 Removing the Memory Module  ¶ 

  • Remove the memory module from the memory-module connector.

Passo 3 Align the Notch  ¶ 

CAUTION: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you install a memory module in the connector labeled "DIMM B." Align the notch on the memory module with the tab on the  memory-module connector.

Passo 3 Align the Notch  ¶ 

  • CAUTION: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you install a memory module in the connector labeled "DIMM B."

  • Align the notch on the memory module with the tab on the memory-module connector.

Passo 4 Installing the Memory Module  ¶ 

Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

Passo 4 Installing the Memory Module  ¶ 

  • Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

  • NOTE: If the memory module is not in stalled properly, the computer may not boot.