Salta al contenuto principale
Aiuto

Dell Inspiron 13 7378 Display Assembly Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: Terrence15
  • Stima il tempo: 15 - 30 minuti
  • Difficoltà: Facile

In this guide, we will be showing you how to remove and replace the Display Assembly.

Passo 1 Peeling off the Tape  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. Peel off the pieces of tape that secure the display cable and touch-screen board-cable to the system board.

Passo 1 Peeling off the Tape  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Peel off the pieces of tape that secure the display cable and touch-screen board-cable to the system board.

Passo 2 Open the Latches  ¶ 

Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.

Passo 2 Open the Latches  ¶ 

  • Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.

Passo 3 Open the Display  ¶ 

Turn the computer over and open the display as far as possible.

Passo 3 Open the Display  ¶ 

  • Turn the computer over and open the display as far as possible.

  • CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.

Passo 4 Remove the Screws  ¶ 

Place the computer face down on a flat surface.

Passo 4 Remove the Screws  ¶ 

  • Place the computer face down on a flat surface.

  • Remove the screws that secure the display assembly to the palm-rest assembly.

Passo 5 Lifting the Display Assembly  ¶ 

Lift the display assembly off the palm-rest assembly.

Passo 5 Lifting the Display Assembly  ¶ 

  • Lift the display assembly off the palm-rest assembly.

Passo 6 Placing the Display Assembly  ¶ 

Place the NEW display assembly face down on the palm-rest assembly.

Passo 6 Placing the Display Assembly  ¶ 

  • Place the NEW display assembly face down on the palm-rest assembly.

Passo 7 Align the Screw Holes  ¶ 

Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Passo 7 Align the Screw Holes  ¶ 

  • Align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Passo 8 Replace the Screws  ¶ 

Replace the screws that secure the display assembly to the palm-rest assembly.

Passo 8 Replace the Screws  ¶ 

  • Replace the screws that secure the display assembly to the palm-rest assembly.

Passo 9 Close the Display  ¶ 

Close the display and turn the computer over.

Passo 9 Close the Display  ¶ 

  • Close the display and turn the computer over.

Passo 10 Securing the Cables  ¶ 

Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables.

Passo 10 Securing the Cables  ¶ 

  • Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables.

Passo 11 Adhering the Tape  ¶ 

Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board.

Passo 11 Adhering the Tape  ¶ 

  • Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board.