Salta al contenuto principale
Aiuto

Dell Inspiron 15-5559 Back Panel Replacement

This guide will show you how to properly remove the back panel of the Dell Inspiron 15-5559.

  • Autore: Kyla Ward
  • Stima il tempo: 1 - 2 minuti
  • Difficoltà: Molto facile

Before removing the back panel, make sure the device is disconnected from any power source. Make sure that your battery has also been removed.

Passo 1 Back Panel  ¶ 

Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel. Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.

Passo 1 Back Panel  ¶ 

  • Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.

Passo 2  ¶ 

Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off. Do not be afraid to use a bit of muscle, as the panel does not come off without some force.

Passo 2  ¶ 

  • Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.

  • Do not be afraid to use a bit of muscle, as the panel does not come off without some force.