Salta al contenuto principale
Aiuto

HP Stream 13-c010nr Disassembly

This guide will show you how to disassemble a HP Stream 13-c010nr laptop.

  • Autore: Keegan Lapham
  • Stima il tempo: 15 minuti
  • Difficoltà: Moderato

This guide will show you how to disassemble a HP Stream 13-c010nr laptop.

Passo 1 HP Stream 13-c010nr Disassembly  ¶ 

Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

Passo 1 HP Stream 13-c010nr Disassembly  ¶ 

  • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

Passo 2  ¶ 

Remove the thirteen 5mm Phillips #0 screws from the bottom case. Remove the thirteen 5mm Phillips #0 screws from the bottom case.

Passo 2  ¶ 

  • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

Passo 3  ¶ 

Flip the laptop over and open it up. Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

Passo 3  ¶ 

  • Flip the laptop over and open it up.

  • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

  • Lift up the keyboard.

  • Ribbon cables still connect the two pieces.

Passo 4  ¶ 

Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

Passo 4  ¶ 

  • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

  • Pull up the ribbon cables from their sockets.