Salta al contenuto principale
Aiuto

HP Pavilion g4-1117dx Larger Back Panel Replacement

Necessarie Più Immagini

Necessarie Più Immagini

Con poche altre immagini, le procedure illustrate in questa guida sarebbero chiarissime.

How to remove the HP Pavilion g4-1117dx larger back panel.

The large back panel contains a lot of screws that help keep it in tact. It covers and protects the majority of your device's insides. It can be somewhat tricky to remove.

Passo 1 Larger Back Panel  ¶ 

Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.

Passo 1 Larger Back Panel  ¶ 

  • Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.

Passo 2  ¶ 

Remove 3 screws located where the battery previously was.

Passo 2  ¶ 

  • Remove 3 screws located where the battery previously was.

Passo 3  ¶ 

Remove 6 screws located under the spot where the smaller L-shaped panel was located. Remove 6 screws located under the spot where the smaller L-shaped panel was located.

Passo 3  ¶ 

  • Remove 6 screws located under the spot where the smaller L-shaped panel was located.

Passo 4  ¶ 

Slowly pry off the keyboard from the back panel.

Passo 4  ¶ 

  • Slowly pry off the keyboard from the back panel.

  • Between the back panel and the keyboard there are two ribbon wires.

  • Remove slowly to not break the back panel. If it does not come off easily, check to see if all screws are removed.

Passo 5  ¶ 

Unplug wires connecting back panel to keyboard.

Passo 5  ¶ 

  • Unplug wires connecting back panel to keyboard.