Salta al contenuto principale
Aiuto

Zoomer Meowzies Back Button Contact Replacement

To access the contact for the button on the back of the device for cleaning or replacement.

The button on the device's back may sometimes become damaged or dirty and therefore need replacement. This guide will go over how to access the back button's contact in order to clean or replace.

Strumenti (continua)
Componenti Rilevanti

Passo 1 Back Button Contact Point  ¶ 

Locate the gray rubber contact in the middle of the bottom half of the device. Using the spudger, lift one corner of the contact until it pops loose. Grab the contact and gently pull until the other side detaches. When replacing the contact pad, use the narrow leads on the pad to pull it into place by twisting around the tips of the tweezers.

Passo 1 Back Button Contact Point  ¶ 

  • Locate the gray rubber contact in the middle of the bottom half of the device. Using the spudger, lift one corner of the contact until it pops loose.

  • Grab the contact and gently pull until the other side detaches.

  • When replacing the contact pad, use the narrow leads on the pad to pull it into place by twisting around the tips of the tweezers.