Salta al contenuto principale
Aiuto

Dell Inspiron 11-3162 Display Assembly Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: Terrence15
  • Stima il tempo: 10 - 35 minuti
  • Difficoltà: Facile

In this guide, we will show you how to remove and replace the Display Assembly.

Passo 1 Remove the Screw  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer.After working inside your computer, follow the instructions in After working inside your computer.

Passo 1 Remove the Screw  ¶ 

Passo 2 Lifting the Display Cable  ¶ 

Slide and lift the display-cable bracket off the system board.

Passo 2 Lifting the Display Cable  ¶ 

  • Slide and lift the display-cable bracket off the system board.

Passo 3 Open the Latch  ¶ 

Open the latch and disconnect the display cable from the system board. Open the latch and disconnect the display cable from the system board.

Passo 3 Open the Latch  ¶ 

  • Open the latch and disconnect the display cable from the system board.

Passo 4 Open the Palm Rest  ¶ 

Open the palm rest and keyboard assembly at an angle.

Passo 4 Open the Palm Rest  ¶ 

  • Open the palm rest and keyboard assembly at an angle.

Passo 5 Remove the Screws  ¶ 

Remove the screws that secure the display assembly to the palm rest and keyboard assembly.

Passo 5 Remove the Screws  ¶ 

  • Remove the screws that secure the display assembly to the palm rest and keyboard assembly.

Passo 6 Lifting the Assemblies  ¶ 

Slide and lift the palm rest and keyboard assembly off the display assembly.

Passo 6 Lifting the Assemblies  ¶ 

  • Slide and lift the palm rest and keyboard assembly off the display assembly.

Passo 7 Placing the Display Assembly  ¶ 

Place the NEW display assembly on a flat and clean surface.

Passo 7 Placing the Display Assembly  ¶ 

  • Place the NEW display assembly on a flat and clean surface.

Passo 8 Align the Screw Holes  ¶ 

Align the screw holes on the display hinges with the screw holes on the palm rest and keyboard assembly.

Passo 8 Align the Screw Holes  ¶ 

  • Align the screw holes on the display hinges with the screw holes on the palm rest and keyboard assembly.

Passo 9 Replace the Screws  ¶ 

Replace the screws that secure the display assembly to the palm rest and keyboard assembly.

Passo 9 Replace the Screws  ¶ 

  • Replace the screws that secure the display assembly to the palm rest and keyboard assembly.

Passo 10 Securing the Cable  ¶ 

Slide the display cable into the connector on the system board and close the latch to secure the cable.

Passo 10 Securing the Cable  ¶ 

  • Slide the display cable into the connector on the system board and close the latch to secure the cable.

Passo 11 Sliding the Display Cable  ¶ 

Slide the display-cable bracket into the slot on the palm rest and keyboard assembly.

Passo 11 Sliding the Display Cable  ¶ 

  • Slide the display-cable bracket into the slot on the palm rest and keyboard assembly.

Passo 12 Align the Screw Hole  ¶ 

Align the screw hole on the display-cable bracket with the screw hole on the system board.

Passo 12 Align the Screw Hole  ¶ 

  • Align the screw hole on the display-cable bracket with the screw hole on the system board.

Passo 13 Replace the Screw  ¶ 

Replace the screw that secures the display-cable bracket to the system board.

Passo 13 Replace the Screw  ¶ 

  • Replace the screw that secures the display-cable bracket to the system board.