Salta al contenuto principale
Aiuto

Lorex LW2744 Wi-Fi Antenna Replacement

Necessarie Più Immagini

Necessarie Più Immagini

Con poche altre immagini, le procedure illustrate in questa guida sarebbero chiarissime.

How to replace the Wi-Fi antenna in a Lorex LW2744.

  • Autore: Yancey Crase
  • Stima il tempo: 15 minuti
  • Difficoltà: Moderato

This guide explains how to re-attach the WiFi antenna.

Passo 1 Wi-Fi Antenna  ¶ 

Remove the remaining five 6.0 mm Phillips #0 screws.

Passo 1 Wi-Fi Antenna  ¶ 

  • Remove the remaining five 6.0 mm Phillips #0 screws.

Passo 2  ¶ 

Use the spudger to remove the back cover. Insert the spudger between the back and front cover. Once inserted, you will need to move it around the perimeter to release the snaps holding it together.

Passo 2  ¶ 

  • Use the spudger to remove the back cover. Insert the spudger between the back and front cover. Once inserted, you will need to move it around the perimeter to release the snaps holding it together.

Passo 3  ¶ 

Once back cover is removed, the speaker wire will need to be removed. Use tweezers to remove wire.

Passo 3  ¶ 

  • Once back cover is removed, the speaker wire will need to be removed. Use tweezers to remove wire.

Passo 4  ¶ 

Begin by heating the exposed end of the grey lead with the tip of a soldering iron while simultaneously pulling the lead away from the connection, using tweezers to grasp the lead by the insulation.

Passo 4  ¶ 

  • Begin by heating the exposed end of the grey lead with the tip of a soldering iron while simultaneously pulling the lead away from the connection, using tweezers to grasp the lead by the insulation.

  • For more information on soldering, check out this repair guide: iFixit Soldering