Salta al contenuto principale
Aiuto

HP Pavilion Sleekbook 15-b000 Screen Replacement

Remove the Screen for future repairs or replace the Screen if damaged.

  • Autore: Sam Barkley
  • Stima il tempo: 45 minuti
  • Difficoltà: Moderato

This guide will go through the steps to replace the screen if it is not displaying anything or the display is distorted.

Sezioni

Passo 1 Screen  ¶ 

Remove the four 5.5mm Phillips #1 screws attaching the screen.

Passo 1 Screen  ¶ 

  • Remove the four 5.5mm Phillips #1 screws attaching the screen.

Passo 2  ¶ 

Remove the two 3.5mm Phillips #1 screws from the bottom of the screen.

Passo 2  ¶ 

  • Remove the two 3.5mm Phillips #1 screws from the bottom of the screen.

Passo 3  ¶ 

Remove the screen from it's case.

Passo 3  ¶ 

  • Remove the screen from it's case.

  • Screen is still connected to it's case by a wire.

Passo 4  ¶ 

Lay the screen face down on a surface where it ill not scratch

Passo 4  ¶ 

  • Lay the screen face down on a surface where it ill not scratch

Passo 5  ¶ 

Lift up plastic over latch for the screen. Pull the connector away from the screen to disconnect  it.

Passo 5  ¶ 

  • Lift up plastic over latch for the screen.

  • Pull the connector away from the screen to disconnect it.