Salta al contenuto principale
Aiuto

Logitech G700s Side Button Array Replacement

Replace the four side buttons on a Logitech G700s gaming mouse.

  • Autore: Chase Tisinger
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Moderato

By following this guide you will be able to remove and replace the quad side button array on your Logitech G700s gaming mouse.

Passo 1 Programmable Side Buttons  ¶ 

Remove the three 5.5mm Phillips #00 screws holding the button assembly to the mouse. Do not remove any of the screws on the circuit board, only the ones holding the plastic assembly in place Do not remove any of the screws on the circuit board, only the ones holding the plastic assembly in place

Passo 1 Programmable Side Buttons  ¶ 

  • Remove the three 5.5mm Phillips #00 screws holding the button assembly to the mouse.

  • Do not remove any of the screws on the circuit board, only the ones holding the plastic assembly in place

Passo 2  ¶ 

Disconnect the button board from the motherboard and remove the whole assembly. Disconnect the button board from the motherboard and remove the whole assembly. Disconnect the button board from the motherboard and remove the whole assembly.

Passo 2  ¶ 

  • Disconnect the button board from the motherboard and remove the whole assembly.