Salta al contenuto principale
Aiuto

LG Phoenix 2 Speaker Replacement

Use this guide to replace the speaker in your LG Phoenix 2.

  • Autore: Esteban Ruibal
  • Stima il tempo: 30 minuti
  • Difficoltà: Moderato

This guide will walk you through the process of replacing a speaker in an LG Phoenix 2. A speaker replacement may be needed if no sound comes out of the speaker.

The speaker model used in this phone is a KRP621 W1P speaker.

Sezioni
Strumenti

Passo 1 Speaker  ¶ 

Locate the SIM card in the top right corner on the back of the phone. Remove the SIM card by pushing it with your thumb from left to right.

Passo 1 Speaker  ¶ 

  • Locate the SIM card in the top right corner on the back of the phone.

  • Remove the SIM card by pushing it with your thumb from left to right.

Passo 2  ¶ 

Remove all 9 screws on the back by using a Phillips head #J00 screwdriver. To remove the screws rotate them counterclockwise. To remove the screws rotate them counterclockwise.

Passo 2  ¶ 

  • Remove all 9 screws on the back by using a Phillips head #J00 screwdriver.

  • To remove the screws rotate them counterclockwise.

Passo 3  ¶ 

Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone). Pry the bottom shield to separate it from the phone. Once it is loose you should be able to remove it with your hand.

Passo 3  ¶ 

  • Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone).

  • Pry the bottom shield to separate it from the phone.

  • Once it is loose you should be able to remove it with your hand.

Passo 4  ¶ 

Insert the flat end of the Spudger between the screen and the chromed frame. Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield. Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.

Passo 4  ¶ 

  • Insert the flat end of the Spudger between the screen and the chromed frame.

  • Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.

Passo 5  ¶ 

Remove the speaker by using the Spudger. Remove the speaker by using the Spudger. Remove the speaker by using the Spudger.

Passo 5  ¶ 

  • Remove the speaker by using the Spudger.