Salta al contenuto principale
Aiuto

Alienware M11xR2 Battery Pack Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

  • Autore: darrius
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Facile

In this guide, we will be showing you how to remove and replace the Battery Pack.

Passo 1 Removing Screws  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer.

Passo 1 Removing Screws  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer)

  • Remove the two screws that secure the battery pack to the computer base.

Passo 2 Disconnecting cable  ¶ 

Disconnect the battery pack cable from the connector on the system board.

Passo 2 Disconnecting cable  ¶ 

  • Disconnect the battery pack cable from the connector on the system board.

Passo 3 Lifting Battery Pack  ¶ 

Using the pull-tab, lift the battery pack off the computer base.

Passo 3 Lifting Battery Pack  ¶ 

  • Using the pull-tab, lift the battery pack off the computer base.

Passo 4 Placing New Battery Pack  ¶ 

Place the NEW battery pack in the battery bay and replace the two screws that secure the battery pack to the computer base.

Passo 4 Placing New Battery Pack  ¶ 

  • Place the NEW battery pack in the battery bay and replace the two screws that secure the battery pack to the computer base.

Passo 5 Routing Battery Pack  ¶ 

Route the battery pack cable in the routing guide

Passo 5 Routing Battery Pack  ¶ 

  • Route the battery pack cable in the routing guide

Passo 6 Connnecting Battery Pack  ¶ 

Connect the battery pack cable to the connector on the system board.

Passo 6 Connnecting Battery Pack  ¶ 

  • Connect the battery pack cable to the connector on the system board.