Salta al contenuto principale
Aiuto

SiriusXM Onyx Plus Antennae/Powerport Replacement

How to replace the Antennae power port board in the docking station of a SiriusXM Onyx Plus radio.

  • Autore: Angel Rivera
  • Stima il tempo: 2 minuti
  • Difficoltà: Facile

How to replace the Antennae power port board in the docking station of a SiriusXM Onyx Plus radio.

Passo 1 Antennae/Powerport  ¶ 

Remove the two 7.6mm Torx T6 screws from the back of the docking station. Remove the two 7.6mm Torx T6 screws from the back of the docking station.

Passo 1 Antennae/Powerport  ¶ 

  • Remove the two 7.6mm Torx T6 screws from the back of the docking station.

Passo 2  ¶ 

Pull the back casing off.

Passo 2  ¶ 

  • Pull the back casing off.

Passo 3  ¶ 

Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.

Passo 3  ¶ 

  • Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.