Salta al contenuto principale
Aiuto

Razer Naga Expert MMO Scroll Wheel Replacement

Easily remove scroll wheel to replace it or to reach the motherboard underneath it.

Make sure to be careful you keep track of which screws you are using and which screws go where when disassembling. There are different types of screws used- one type being the screws used to separate the plastic shell and the other used to unscrew the scroll wheel itself.

Passo 1 Scroll Wheel  ¶ 

Remove the 5mm screw holding the scroll wheel in place with a Phillips head #00 screwdriver.

Passo 1 Scroll Wheel  ¶ 

  • Remove the 5mm screw holding the scroll wheel in place with a Phillips head #00 screwdriver.

Passo 2  ¶ 

Unplug the cord that connects the scroll wheel to the circuit board.

Passo 2  ¶ 

  • Unplug the cord that connects the scroll wheel to the circuit board.

Passo 3  ¶ 

Slide the chip out of the scroll wheel.

Passo 3  ¶ 

  • Slide the chip out of the scroll wheel.

Passo 4  ¶ 

Gently wiggle the scroll wheel up and back to remove the scroll wheel from the mouse. Use your fingers to simultaneously push the scroll wheel and its frame forward and pull back on the plastic tab directly behind the scroll wheel until it is loose.

Passo 4  ¶ 

  • Gently wiggle the scroll wheel up and back to remove the scroll wheel from the mouse.

  • Use your fingers to simultaneously push the scroll wheel and its frame forward and pull back on the plastic tab directly behind the scroll wheel until it is loose.

  • Use your thumbs to pop the scroll wheel out from its plastic frame.

Passo 5  ¶ 

Place the new scroll wheel in the mount.

Passo 5  ¶ 

  • Place the new scroll wheel in the mount.

  • Upon reassembly, be careful to ensure the silver box on the side of the wheel is placed into the frame with the tab facing downward so upon entry into the frame it fits into its slot.