Salta al contenuto principale
Aiuto

Sony Vaio Fit SVF14A190X Fan Replacement

Guida Studente in Evidenza

Guida Studente in Evidenza

Questa guida è frutto del duro lavoro dei nostri bravissimi studenti e il nostro staff iFixit la trova eccezionalmente brillante.

Fan replacement for the Sony Vaio Fit SVF14A190X

This is an easy to follow, step by step guide to help aid in the replacement of a fan for the Sony Vaio Fit SVF14A190X. The fan helps keep your device at cool operating temperatures to prevent overheating.

Passo 1 Fan Replacement  ¶ 

Use the Phillips head screw driver to remove the two 5 mm screws on the fan.

Passo 1 Fan Replacement  ¶ 

  • Use the Phillips head screw driver to remove the two 5 mm screws on the fan.

  • Loosen the four screws with the Phillips head screw driver on the copper cooling component. These screws will not come all of the way out.

Passo 2  ¶ 

Gently grab the base of the fan wire connection. Pull the base of the wire connection from the motherboard to disconnect the wires. Pull the base of the wire connection from the motherboard to disconnect the wires.

Passo 2  ¶ 

  • Gently grab the base of the fan wire connection.

  • Pull the base of the wire connection from the motherboard to disconnect the wires.

Passo 3  ¶ 

Once the prior two steps have been completed, obtain the plastic opening tool. Gently place the plastic opening tool underneath the fan and separate the fan from the device by sliding the tool along the bottom of the fan. Once separated, you can now lift the fan out by hand.

Passo 3  ¶ 

  • Once the prior two steps have been completed, obtain the plastic opening tool.

  • Gently place the plastic opening tool underneath the fan and separate the fan from the device by sliding the tool along the bottom of the fan.

  • Once separated, you can now lift the fan out by hand.