Salta al contenuto principale
Aiuto

Dell Alienware 14 Battery Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Follow this guide to replace the battery for the Dell Alienware 14.

  • Autore: Terrence15
  • Stima il tempo: 3 - 9 minuti
  • Difficoltà: Molto facile

In this guide, we will show you how to remove and replace the Battery.

Sezioni
Strumenti

Passo 1 Disconnecting the Battery Cable  ¶ 

WARNING:  Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer.   After working inside your computer, follow the instructions in After Working Inside Your Computer.

Passo 1 Disconnecting the Battery Cable  ¶ 

Passo 2 Remove the Screws  ¶ 

Remove the screws that secure the battery to the computer base.

Passo 2 Remove the Screws  ¶ 

  • Remove the screws that secure the battery to the computer base.

Passo 3 Using the Battery Cable  ¶ 

Using the battery cable, lift the battery and release it from the tabs on the computer base.

Passo 3 Using the Battery Cable  ¶ 

  • Using the battery cable, lift the battery and release it from the tabs on the computer base.

Passo 4 Turn the Computer Over  ¶ 

Turn the computer over and open the display as far as possible.

Passo 4 Turn the Computer Over  ¶ 

  • Turn the computer over and open the display as far as possible.

Passo 5 The Power Button  ¶ 

Press and hold the power button for five seconds to ground the system board.

Passo 5 The Power Button  ¶ 

  • Press and hold the power button for five seconds to ground the system board.

Passo 6 Close the Display  ¶ 

Nessuna immagine

Passo 6 Close the Display  ¶ 

  • Close the display and turn the computer over.

Passo 7 Align the Tabs  ¶ 

Align the tabs on the NEW battery with  the slots on the computer base.

Passo 7 Align the Tabs  ¶ 

  • Align the tabs on the NEW battery with the slots on the computer base.

Passo 8 Align the Screw Holes  ¶ 

Align the screw holes on the battery with  the screw holes on the computer base.

Passo 8 Align the Screw Holes  ¶ 

  • Align the screw holes on the battery with the screw holes on the computer base.

Passo 9 Replace the Screws  ¶ 

Replace the screws that secure the battery to the computer base.

Passo 9 Replace the Screws  ¶ 

  • Replace the screws that secure the battery to the computer base.

Passo 10 Connect the Battery Cable  ¶ 

Connect the battery cable to the system-board connector.

Passo 10 Connect the Battery Cable  ¶ 

  • Connect the battery cable to the system-board connector.