Salta al contenuto principale
Aiuto

Dell Alienware 13 R3 Speakers Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Strada Panoramica

Strada Panoramica

Il procedimento riportato in questa guida non è il più efficace per effettuare il lavoro, ma in alcune circostanze può ancora tornare utile.

In this guide, we will be showing you how to remove and replace the Speakers.

  • Autore: Terrence15
  • Stima il tempo: 10 minuti - 2 ore
  • Difficoltà: Moderato

In this guide, we will be showing you how to remove and replace the Speakers.

Sezioni (continua)

Passo 1 Remove the Screw  ¶ 

WARNING: Before working inside your computer, read the safety  information that shipped with your computer and follow the steps in Before Working Inside Your Computer.  After working inside your  computer, follow the instructions in After Working Inside Your Computer.

Passo 1 Remove the Screw  ¶ 

Passo 2 Lift the Speaker  ¶ 

Lift the left speaker off the palm-rest assembly.

Passo 2 Lift the Speaker  ¶ 

  • Lift the left speaker off the palm-rest assembly.

Passo 3 Peel off the Tape  ¶ 

Peel off the tape that secures the speaker cable to the palm-rest assembly.

Passo 3 Peel off the Tape  ¶ 

  • Peel off the tape that secures the speaker cable to the palm-rest assembly.

Passo 4 Remove the Speaker Cable  ¶ 

Nessuna immagine

Passo 4 Remove the Speaker Cable  ¶ 

  • Remove the speaker cable from the routing guides on the palm-rest assembly.

Passo 5 Lift the Right Speaker  ¶ 

Lift the right speaker off the palm-rest assembly.

Passo 5 Lift the Right Speaker  ¶ 

  • Lift the right speaker off the palm-rest assembly.

Passo 6 Placing the Speaker  ¶ 

Nessuna immagine

Passo 6 Placing the Speaker  ¶ 

  • Using the alignment posts, place the NEW right speaker on the palm-rest assembly.

Passo 7 Route the Speaker Cable  ¶ 

Route the speaker cable through the routing guides on palm-rest assembly.

Passo 7 Route the Speaker Cable  ¶ 

  • Route the speaker cable through the routing guides on palm-rest assembly.

  • NOTE: Move the keyboard and keyboard-backlit cables out of the way.

Passo 8 Placing the Left Speaker  ¶ 

Using the alignment posts, place the NEW left speaker on the palm-rest assembly.

Passo 8 Placing the Left Speaker  ¶ 

  • Using the alignment posts, place the NEW left speaker on the palm-rest assembly.

Passo 9 Adhere the Tape  ¶ 

Nessuna immagine

Passo 9 Adhere the Tape  ¶ 

  • Adhere the tape that secures the speaker cable to the palm-rest assembly.

Passo 10 Replace the Screw  ¶ 

Replace the screw (M2x3) that secures the speaker to the palm-rest assembly.

Passo 10 Replace the Screw  ¶ 

  • Replace the screw (M2x3) that secures the speaker to the palm-rest assembly.