Salta al contenuto principale
Aiuto

Dell Alienware 13 R3 Wireless Card Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Dettagli Mancanti

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

In this guide, we will show you how to remove and replace the wireless card.

  • Autore: Terrence15
  • Stima il tempo: 7 - 30 minuti
  • Difficoltà: Facile

In this guide, we will show you how to remove and replace the wireless card.

Sezioni
Strumenti

Passo 1 Align the Notch  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Passo 1 Align the Notch  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • CAUTION: To avoid damaging the wireless card, do not place any cables under it.

  • Remove the screw (M2x3) that secures the wireless card and bracket to the computer base.

Passo 2 Lift the Wireless-Card Bracket  ¶ 

Lift the wireless-card bracket off the wireless card.

Passo 2 Lift the Wireless-Card Bracket  ¶ 

  • Lift the wireless-card bracket off the wireless card.

Passo 3 Disconnecting the Antenna Cables  ¶ 

Disconnect the antenna cables from the wireless card.

Passo 3 Disconnecting the Antenna Cables  ¶ 

  • Disconnect the antenna cables from the wireless card.

Passo 4 Align the Notch  ¶ 

Nessuna immagine

Passo 4 Align the Notch  ¶ 

  • CAUTION: To avoid damaging the wireless card, do not place any cables under it.

  • Align the notch on the wireless card with the tab on the wireless-card slot.

Passo 5 Slide the Wireless Card  ¶ 

Nessuna immagine

Passo 5 Slide the Wireless Card  ¶ 

  • Slide the NEW wireless card at an angle into the wireless-card slot.

Passo 6 Connect the Antenna Cables  ¶ 

Nessuna immagine

Passo 6 Connect the Antenna Cables  ¶ 

  • Connect the antenna cables to the wireless card.

Passo 7 Align the Screw Hole  ¶ 

Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and the computer base.

Passo 7 Align the Screw Hole  ¶ 

  • Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and the computer base.

Passo 8 Replace the Screw  ¶ 

Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the computer base.

Passo 8 Replace the Screw  ¶ 

  • Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the computer base.