Salta al contenuto principale
Aiuto

Dell Alienware 13 R3 Coin-Cell Battery Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Dettagli Mancanti

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

In this guide, we will show you how to remove and replace the coin-cell battery.

  • Autore: Terrence15
  • Stima il tempo: 5 minuti - 1 ora
  • Difficoltà: Moderato

In this guide, we will show you how to remove and replace the coin-cell battery.

Passo 1 Disconnecting the Coin-Cell Battery  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Passo 1 Disconnecting the Coin-Cell Battery  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that you note the BIOS setup program’s settings before removing the coin-cell battery.

  • Disconnect the coin-cell battery cable from the system board.

Passo 2 Peeling the Coin-Cell Battery  ¶ 

Gently peel off the coin-cell battery along with its cable off the palm-rest assembly.

Passo 2 Peeling the Coin-Cell Battery  ¶ 

  • Gently peel off the coin-cell battery along with its cable off the palm-rest assembly.

Passo 3 Adhere the Coin-Cell Battery  ¶ 

Adhere the NEW coin-cell battery to the palm-rest assembly.

Passo 3 Adhere the Coin-Cell Battery  ¶ 

  • Adhere the NEW coin-cell battery to the palm-rest assembly.

Passo 4 Connect the Coin-Cell Battery  ¶ 

Nessuna immagine

Passo 4 Connect the Coin-Cell Battery  ¶ 

  • Connect the coin-cell battery cable to the system board.