Salta al contenuto principale
Aiuto

Fujifilm FinePix Z1 Battery Replacement

Replacing a faulty or old battery with a new one.

  • Autore: Carra
  • Stima il tempo: 1 - 3 minuti
  • Difficoltà: Facile

This guide will teach you how to replace a battery that is faulty or old in the Fujifilm FinePix Z1 camera.

Passo 1 Battery  ¶ 

Make sure the battery on the display screen of the camera is charged. If it is not fully charged, plug into charger and turn the camera on.

Passo 1 Battery  ¶ 

  • Make sure the battery on the display screen of the camera is charged. If it is not fully charged, plug into charger and turn the camera on.

  • If the battery image on the display screen does not show then you will need to check the battery.

Passo 2  ¶ 

Turn the camera to the bottom and find the battery access door on the left side.

Passo 2  ¶ 

  • Turn the camera to the bottom and find the battery access door on the left side.

Passo 3  ¶ 

Open the battery access door by pushing down and up on the spring-hinged door. Check that there is no obvious damage or reason for a faulty battery.

Passo 3  ¶ 

  • Open the battery access door by pushing down and up on the spring-hinged door.

  • Check that there is no obvious damage or reason for a faulty battery.

Passo 4  ¶ 

Push the yellow tab to eject the battery.

Passo 4  ¶ 

  • Push the yellow tab to eject the battery.

Passo 5  ¶ 

Remove the battery and replace with a new one.

Passo 5  ¶ 

  • Remove the battery and replace with a new one.