Salta al contenuto principale
Aiuto

Dell Alienware 13 R2 Display Assembly Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Prerequisite Mancanti

Prerequisite Mancanti

A questa guida mancano informazioni su come avviare la procedura. Fai una guida prerequisita!

Dettagli Mancanti

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

Dell Alienware 13 R2 Display Assembly Replacement

  • Autore: Terrence15
  • Stima il tempo: 15 minuti - 2 ore
  • Difficoltà: Moderato

In this guide, we will be showing you how to replace the Display Assembly.

Passo 1 Open the Display  ¶ 

Nessuna immagine

Passo 1 Open the Display  ¶ 

Passo 2 Remove the Screws  ¶ 

Remove the screws that secure the hinge caps to the display hinges. Remove the screws that secure the hinge caps to the display hinges.

Passo 2 Remove the Screws  ¶ 

  • Remove the screws that secure the hinge caps to the display hinges.

Passo 3 Lifting the Hinge Caps  ¶ 

Slide and lift the hinge caps off the display hinges.

Passo 3 Lifting the Hinge Caps  ¶ 

  • Slide and lift the hinge caps off the display hinges.

Passo 4 Close the Display  ¶ 

Nessuna immagine

Passo 4 Close the Display  ¶ 

  • Close the display and turn the computer over.

Passo 5 Remove the Screw  ¶ 

Remove the screw that secures the wireless-card bracket to the wireless  card. Remove the screw that secures the wireless-card bracket to the wireless  card.

Passo 5 Remove the Screw  ¶ 

  • Remove the screw that secures the wireless-card bracket to the wireless card.

Passo 6 Disconnect the Antenna Cables  ¶ 

Disconnect the antenna cables from the wireless card.

Passo 6 Disconnect the Antenna Cables  ¶ 

  • Disconnect the antenna cables from the wireless card.

Passo 7 Turn the Computer Over  ¶ 

Nessuna immagine

Passo 7 Turn the Computer Over  ¶ 

  • Turn the computer over and open the display.

Passo 8 Remove the Antenna Cables  ¶ 

Remove the antenna cables from the routing guides on the display hinges.

Passo 8 Remove the Antenna Cables  ¶ 

  • Remove the antenna cables from the routing guides on the display hinges.

Passo 9 Disconnect the Display Cable  ¶ 

Lift the connector latch and disconnect the display cable from the system  board. Lift the connector latch and disconnect the display cable from the system  board.

Passo 9 Disconnect the Display Cable  ¶ 

  • Lift the connector latch and disconnect the display cable from the system board.

Passo 10 Remove the Display Cable  ¶ 

Remove the display cable from the routing guides on the display hinges. Remove the display cable from the routing guides on the display hinges.

Passo 10 Remove the Display Cable  ¶ 

  • Remove the display cable from the routing guides on the display hinges.

Passo 11 Disconnect the Logo-Board Cable  ¶ 

Disconnect the logo-board cable from the system board and remove it  from the routing guides on the display hinges.

Passo 11 Disconnect the Logo-Board Cable  ¶ 

  • Disconnect the logo-board cable from the system board and remove it from the routing guides on the display hinges.

Passo 12 Remove the Screws  ¶ 

Remove the screws that secure the display assembly to the computer  base.

Passo 12 Remove the Screws  ¶ 

  • Remove the screws that secure the display assembly to the computer base.

Passo 13 Lifting the Display Assembly  ¶ 

Nessuna immagine

Passo 13 Lifting the Display Assembly  ¶ 

  • Lift the display assembly off the computer base.

Passo 14 Align the Screw Holes  ¶ 

Align the screw holes on the display hinges with the screw holes on the  computer base.

Passo 14 Align the Screw Holes  ¶ 

  • Align the screw holes on the display hinges with the screw holes on the computer base.

Passo 15 Replace the Screws  ¶ 

Replace the screws that secure the display hinges to the computer base.

Passo 15 Replace the Screws  ¶ 

  • Replace the screws that secure the display hinges to the computer base.

Passo 16 Routing the Logo-Board Cable  ¶ 

Route the logo-board cable through the routing guides on the display  hinge and connect the logo-board cable to the system board.

Passo 16 Routing the Logo-Board Cable  ¶ 

  • Route the logo-board cable through the routing guides on the display hinge and connect the logo-board cable to the system board.

Passo 17 Route the Cable  ¶ 

Route the display cable through the routing guides on the display hinge.

Passo 17 Route the Cable  ¶ 

  • Route the display cable through the routing guides on the display hinge.

Passo 18 Slide the Display Cable  ¶ 

Slide the display cable into the connector on the system board and press down the latch to secure the cable.

Passo 18 Slide the Display Cable  ¶ 

  • Slide the display cable into the connector on the system board and press down the latch to secure the cable.

Passo 19 Route the Antenna Cables  ¶ 

Nessuna immagine

Passo 19 Route the Antenna Cables  ¶ 

  • Route the antenna cables through the routing guides on the display hinges.

Passo 20 Adhere the Adhesive Tapes  ¶ 

Adhere the adhesive tapes that secure the antenna cables to the system  board.

Passo 20 Adhere the Adhesive Tapes  ¶ 

  • Adhere the adhesive tapes that secure the antenna cables to the system board.

Passo 21 Close the Display  ¶ 

Nessuna immagine

Passo 21 Close the Display  ¶ 

  • Close the display and turn the computer over.

Passo 22 Connect the Antenna Cables  ¶ 

Nessuna immagine

Passo 22 Connect the Antenna Cables  ¶ 

  • Connect the antenna cables to the wireless card.

Passo 23 Replace the Screw  ¶ 

Nessuna immagine

Passo 23 Replace the Screw  ¶ 

  • Replace the screw that secures the wireless-card bracket to the wireless card.

Passo 24 Open the Display  ¶ 

Nessuna immagine

Passo 24 Open the Display  ¶ 

  • Turn the computer over and open the display.

Passo 25 Align the Screw Holes  ¶ 

Align the screw holes on the hinge caps with the screw holes on the  display hinges.

Passo 25 Align the Screw Holes  ¶ 

  • Align the screw holes on the hinge caps with the screw holes on the display hinges.

Passo 26 Replace the Screws  ¶ 

Nessuna immagine

Passo 26 Replace the Screws  ¶ 

  • Replace the screws that secure the hinge caps to the display hinges.