Salta al contenuto principale
Aiuto

Dell Alienware 13 R2 Status-Light Board Replacement

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Prerequisite Mancanti

Prerequisite Mancanti

A questa guida mancano informazioni su come avviare la procedura. Fai una guida prerequisita!

Dettagli Mancanti

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

Dell Alienware 13 R2 Status-Light Board Replacement

  • Autore: Terrence15
  • Stima il tempo: 10 minuti - 2 ore
  • Difficoltà: Moderato

In this guide, we will show you how to remove and replace the status light board.

Passo 1 Disconnecting the Status-Light Board Cable  ¶ 

WARNING: Before working inside your computer, read the  safety information that shipped with your computer and  follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions  in After Working Inside Your Computer. Lift the connector latch and disconnect the status-light board cable from  the status-light board.

Passo 1 Disconnecting the Status-Light Board Cable  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Lift the connector latch and disconnect the status-light board cable from the status-light board.

Passo 2 Remove the Screw  ¶ 

Remove the screw that secures the status-light board to the palm-rest  assembly. Remove the screw that secures the status-light board to the palm-rest  assembly.

Passo 2 Remove the Screw  ¶ 

  • Remove the screw that secures the status-light board to the palm-rest assembly.

Passo 3 Lift the Status-Light Board  ¶ 

Nessuna immagine

Passo 3 Lift the Status-Light Board  ¶ 

  • Lift the status-light board off the palm-rest assembly.

Passo 4 Sliding the Cable  ¶ 

Slide the status-light board cable into the status-light board connector  and press down the latch to secure the cable. Slide the status-light board cable into the status-light board connector  and press down the latch to secure the cable.

Passo 4 Sliding the Cable  ¶ 

  • Slide the status-light board cable into the status-light board connector and press down the latch to secure the cable.

Passo 5 Align the Screw Hole  ¶ 

Align the screw hole on the status-light board with the screw hole on the  palm-rest assembly.

Passo 5 Align the Screw Hole  ¶ 

  • Align the screw hole on the status-light board with the screw hole on the palm-rest assembly.

Passo 6 Replace the Screw  ¶ 

Replace the screw that secures the status-light board to the palm-rest  assembly.

Passo 6 Replace the Screw  ¶ 

  • Replace the screw that secures the status-light board to the palm-rest assembly.