Salta al contenuto principale
Aiuto

Google Pixelbook Left Charging Port Replacement

How to replace a Google Pixelbook left charging port.

  • Autore: Alon Gary
  • Stima il tempo: 5 - 20 minuti
  • Difficoltà: Moderato

In this guide, you will learn how to replace the left charging port on your Google Pixelbook to fix charging issues.

Passo 1 Left Charging Port  ¶ 

Remove the two 3.0mm silver screws from the thin, black component by using a T3 Torx screwdriver to turn the screws counterclockwise. Remove the two 3.0mm silver screws from the thin, black component by using a T3 Torx screwdriver to turn the screws counterclockwise.

Passo 1 Left Charging Port  ¶ 

  • Remove the two 3.0mm silver screws from the thin, black component by using a T3 Torx screwdriver to turn the screws counterclockwise.

Passo 2  ¶ 

Disconnect the thin, black and white cord from the motherboard by using the spudger to snap the connector up and out of place. Disconnect the thin, black and white cord from the motherboard by using the spudger to snap the connector up and out of place.

Passo 2  ¶ 

  • Disconnect the thin, black and white cord from the motherboard by using the spudger to snap the connector up and out of place.

Passo 3  ¶ 

Remove the thin, black component by pulling it up and out of the laptop with your fingers.

Passo 3  ¶ 

  • Remove the thin, black component by pulling it up and out of the laptop with your fingers.

  • This photo shows the bottom screw still in the black box, but yours should be removed.

Passo 4  ¶ 

Remove the gold 2.0mm corner screw by turning it counterclockwise with a T3 Torx screwdriver.

Passo 4  ¶ 

  • Remove the gold 2.0mm corner screw by turning it counterclockwise with a T3 Torx screwdriver.

Passo 5  ¶ 

Using needle-nose tweezers, remove the silver casing by lifting it up and out of the computer. Using needle-nose tweezers, remove the silver casing by lifting it up and out of the computer.

Passo 5  ¶ 

  • Using needle-nose tweezers, remove the silver casing by lifting it up and out of the computer.

Passo 6  ¶ 

Remove the three 3.0mm black screws on the right side by using a T5 Torx screwdriver to turn the screws counterclockwise. Remove the silver 2.0mm screw on the left side by using a T3 Torx screwdriver to turn the screw counterclockwise.

Passo 6  ¶ 

  • Remove the three 3.0mm black screws on the right side by using a T5 Torx screwdriver to turn the screws counterclockwise.

  • Remove the silver 2.0mm screw on the left side by using a T3 Torx screwdriver to turn the screw counterclockwise.

Passo 7  ¶ 

Disconnect the thin, black ribbon cable by using the spudger to lift it up from the computer.

Passo 7  ¶ 

  • Disconnect the thin, black ribbon cable by using the spudger to lift it up from the computer.

Passo 8  ¶ 

Use the needle-nose tweezers to remove the charging port by lifting the component up and out of the Pixelbook. Use the needle-nose tweezers to remove the charging port by lifting the component up and out of the Pixelbook.

Passo 8  ¶ 

  • Use the needle-nose tweezers to remove the charging port by lifting the component up and out of the Pixelbook.