Salta al contenuto principale
Aiuto

Motorola Moto Z2 Play Battery Replacement

Guida Studente in Evidenza

Guida Studente in Evidenza

Questa guida è frutto del duro lavoro dei nostri bravissimi studenti e il nostro staff iFixit la trova eccezionalmente brillante.

Replace your Moto Z2 Play's battery with this guide if your battery is no longer working properly or if you would like to replace it.

  • Autore: mitch miller
  • Stima il tempo: 15 minuti
  • Difficoltà: Moderato

If the charge of your Moto Z2 Play consistently goes down too quickly, the battery may be broken. The battery may have died from being left on the charger for too long, or from old age. This guide details how to replace the battery of your Moto Z2 Play. To replace the battery, you need the following tools: a heat gun (or a hair dryer), a plastic opening tool, a suction cup, a plastic card, and a tweezer.

If your battery is swollen, take appropriate precautions.

Passo 1 Battery  ¶ 

Remove the orange tape, located at the bottom right of the phone, using tweezers. Do not discard tape.

Passo 1 Battery  ¶ 

  • Remove the orange tape, located at the bottom right of the phone, using tweezers.

  • Do not discard tape.

Passo 2  ¶ 

Detach the red and black battery wire by lifting up with tweezers. Detach the red and black battery wire by lifting up with tweezers.

Passo 2  ¶ 

  • Detach the red and black battery wire by lifting up with tweezers.

Passo 3  ¶ 

Peel back the black tape that is located on the battery. Make sure you pull back gently so you can reuse the tape with reassembly.

Passo 3  ¶ 

  • Peel back the black tape that is located on the battery.

  • Make sure you pull back gently so you can reuse the tape with reassembly.

Passo 4  ¶ 

Lift  the black tape and slide a card under the battery. Align the card parallel and under the battery. Wedge the card further under the battery.

Passo 4  ¶ 

  • Lift the black tape and slide a card under the battery.

  • Align the card parallel and under the battery.

  • Wedge the card further under the battery.

  • Lift the card up to assist in removing the battery from the adhesive.

Passo 5  ¶ 

Lift to remove the battery from the device completely.

Passo 5  ¶ 

  • Lift to remove the battery from the device completely.