Salta al contenuto principale
Aiuto

Shark Rocket Powerhead AH401 Motor Replacement

Guida Studente in Evidenza

Guida Studente in Evidenza

Questa guida è frutto del duro lavoro dei nostri bravissimi studenti e il nostro staff iFixit la trova eccezionalmente brillante.

This guide will explain how to remove the Shark Rocket Powerhead AH401 brushroll motor if it becomes damaged or too old.

  • Autore: Shobhit Dabral
  • Stima il tempo: 50 minuti
  • Difficoltà: Moderato

If your motor stops working this guide will show you how to replace it. Previous disassembly of the vacuum must already be done in order to get to the motor.

Sezioni
Strumenti
Strumenti (continua)
Componenti Rilevanti

Passo 1 Motor  ¶ 

Remove two 16mm screws by rotating counter-clockwise with a T15 Torx screwdriver.

Passo 1 Motor  ¶ 

  • Remove two 16mm screws by rotating counter-clockwise with a T15 Torx screwdriver.

Passo 2  ¶ 

Remove the belt-assembly unit by pulling the belt-assembly unit away from the motor. Remove the belt-assembly unit by pulling the belt-assembly unit away from the motor.

Passo 2  ¶ 

  • Remove the belt-assembly unit by pulling the belt-assembly unit away from the motor.

Passo 3  ¶ 

Rotate the motor unit over so that the wires are exposed. Cut wires with cutting pliers to release the motor.

Passo 3  ¶ 

  • Rotate the motor unit over so that the wires are exposed.

  • Cut wires with cutting pliers to release the motor.