Salta al contenuto principale
Aiuto

Sony Smart Watch SW2 Battery Replacement

Attrezzi Non Corretti

Attrezzi Non Corretti

Contribuisci a rendere migliore questa guida usando i giusti strumenti nelle immagini e/o nel testo.

Remove and replace the battery inside the smart watch.

  • Autore: Vincent Shiue
  • Stima il tempo: 5 minuti
  • Difficoltà: Moderato

This guide will teach you how to safely replace the battery for the Sony Smart Watch SW2.

Passo 1 Battery  ¶ 

Lift one side of the battery up carefully. There is a thin black circuit adhered to the back of the battery that connects to the motherboard and the charger.

Passo 1 Battery  ¶ 

  • Lift one side of the battery up carefully. There is a thin black circuit adhered to the back of the battery that connects to the motherboard and the charger.

  • The connection is already broken in this image and you will not be able to lift the battery this high.

Passo 2  ¶ 

Push the black piece down while very carefully pulling the battery off. Work your way around without lifting the black piece up too much.

Passo 2  ¶ 

  • Push the black piece down while very carefully pulling the battery off. Work your way around without lifting the black piece up too much.

Passo 3  ¶ 

Once the battery is free from the frame adhesive, desolder the black and red battery wires.

Passo 3  ¶ 

  • Once the battery is free from the frame adhesive, desolder the black and red battery wires.

  • Remove the battery.