Salta al contenuto principale
Aiuto

Aquaris M5 back Cover Replacement

This guide shows you how to take of the back cover of your bq Aquaris M5.

  • Autore: Theo Mat
  • Stima il tempo: 5 minuti
  • Difficoltà: Molto facile

Use this guide to take off the back cover of your bq Aquaris M5.

Passo 1 Back Cover  ¶ 

Insert the tip of an iFixit opening tool between the back cover and the mid frame of the phone. Between the 2 SIM card slots is a good place to start.

Passo 1 Back Cover  ¶ 

  • Insert the tip of an iFixit opening tool between the back cover and the mid frame of the phone.

  • Between the 2 SIM card slots is a good place to start.

  • Slide the opening tool to the bottom of the phone, to snap out the plastic clips, connecting the back cover and mid frame.

Passo 2  ¶ 

Slide the opening tool back to the top of the phone, to disconnect all the clips on the edge. Slide around the corner and along the top edge, to also disconnect these clips.

Passo 2  ¶ 

  • Slide the opening tool back to the top of the phone, to disconnect all the clips on the edge.

  • Slide around the corner and along the top edge, to also disconnect these clips.

Passo 3  ¶ 

Be careful not to bend the back cover too hard to prevent some of the clips breaking. Grab the back cover by the loosened edge. Gently bend and twist the flexible back cover a bit to disconnect the remaining clips.

Passo 3  ¶ 

  • Be careful not to bend the back cover too hard to prevent some of the clips breaking.

  • Grab the back cover by the loosened edge.

  • Gently bend and twist the flexible back cover a bit to disconnect the remaining clips.

  • Take off the back cover.