Samsung Galaxy S4 Mini Motherboard Replacement [Verizon]
Motherboard replacement for [Verizon] SCH-I435.
- Autore: Richard Suovanen
- Stima il tempo: 30 - 40 minuti
- Difficoltà: Moderato
This motherboard replacement guide applies to the Verizon Samsung Galaxy S4 Mini, model number SCH-I435.
Incorpora questa guida
Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito / forum.
Passo 1 — Motherboard [Verizon] ¶
Remove the ten 4.0 mm screws on the back of the phone using the #00 Phillips screwdriver.
Passo 2 ¶
Starting at the USB port, slide a plastic opening tool around the perimeter of the phone between the rear housing and frame. As you work your way around the edge, you will feel the clips release.
Carefully separate the rear housing and the mid-frame to reveal the inside of the phone.
Passo 3 ¶
Use a pair of tweezers to lift the two charging assembly press fit connectors free.
Passo 4 ¶
Use the flat end of a nylon spudger to lift the headphone jack press-fit connector up to release the ribbon cable.
Passo 5 ¶
Use the flat end of a nylon spudger to lift the infrared sensor press-fit connector up to release the ribbon cable.
Passo 6 ¶
Use the flat end of a nylon spudger to lift the front-facing camera press-fit connector up to release the ribbon cable.
Passo 7 ¶
Gently lift the motherboard up and partially away from the device.
Passo 8 ¶
Put the flat end of a nylon spudger under the lip of the digitizer press-fit connector and lift up to release the connector and free the motherboard.