Salta al contenuto principale
Aiuto

Dell Alienware 13 Solid-State Drive (SSD) Replacement

Solo Prerequisita

Solo Prerequisita

Per favore tieni conto che questa guida è solo un prerequisito per altre guide.

Guida con Contributo Membro

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Introduzione Migliore

Introduzione Migliore

Migliora questa guida completando o revisionando la sua introduzione.

Dettagli Mancanti

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

How to remove and replace the SSD.

  • Autore: Terrence15
  • Stima il tempo: 15 - 30 minuti
  • Difficoltà: Moderato

In this guide, we will be showing you how to remove and replace the Solid-State Drive.

Passo 1 Caution  ¶ 

Nessuna immagine

Passo 1 Caution  ¶ 

  • CAUTION: Solid-state drives are fragile. Exercise care when handling the hard drive.

  • CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.

Passo 2 Pull Tab  ¶ 

Using the pull tab, pivot the solid-state drive bracket and peel off the bracket from the tabs on the computer base.

Passo 2 Pull Tab  ¶ 

  • Using the pull tab, pivot the solid-state drive bracket and peel off the bracket from the tabs on the computer base.

Passo 3 Disconnecting the State Drive  ¶ 

Using the pull tab, disconnect the solid-state drive cable from the system board.

Passo 3 Disconnecting the State Drive  ¶ 

  • Using the pull tab, disconnect the solid-state drive cable from the system board.

Passo 4 Remove Screws  ¶ 

Remove the screws that secure the solid-state drive assembly to the computer base.

Passo 4 Remove Screws  ¶ 

  • Remove the screws that secure the solid-state drive assembly to the computer base.

Passo 5 Solid-State Drive Assembly Lift  ¶ 

Lift the solid-state drive assembly off the computer base. Make sure the screws are off the solid-state assembly.

Passo 5 Solid-State Drive Assembly Lift  ¶ 

  • Lift the solid-state drive assembly off the computer base.

  • Make sure the screws are off the solid-state assembly.

Passo 6 Slide and Lift  ¶ 

Slide and lift the solid-state drive off the solid-state assembly.

Passo 6 Slide and Lift  ¶ 

  • Slide and lift the solid-state drive off the solid-state assembly.

Passo 7 Replacing the Solid-State Drive  ¶ 

CAUTION: Solid-state drives are fragile. Exercise care when handling the hard drive.

Passo 7 Replacing the Solid-State Drive  ¶ 

  • CAUTION: Solid-state drives are fragile. Exercise care when handling the hard drive.

  • Slide the new solid-state drive into the solid-state drive assembly.

Passo 8 Replace the Screw  ¶ 

Replace the screw that secures the solid-state drive assembly with the screw holes on the computer base.

Passo 8 Replace the Screw  ¶ 

  • Replace the screw that secures the solid-state drive assembly with the screw holes on the computer base.

Passo 9 Screw Align  ¶ 

Align the screw holes on the solid-state drive assembly with the screw holes on the computer base.

Passo 9 Screw Align  ¶ 

  • Align the screw holes on the solid-state drive assembly with the screw holes on the computer base.

Passo 10 Screw Replacement  ¶ 

Replace the screws that secure the solid-state drive assembly to the computer base.

Passo 10 Screw Replacement  ¶ 

  • Replace the screws that secure the solid-state drive assembly to the computer base.

Passo 11 Connecting the Drive  ¶ 

Connect the solid-state drive cable to the system board.

Passo 11 Connecting the Drive  ¶ 

  • Connect the solid-state drive cable to the system board.

Passo 12 Aligning Screws  ¶ 

Align the screws on the solid-state drive bracket with the screw holes on the solid-state drive assembly.

Passo 12 Aligning Screws  ¶ 

  • Align the screws on the solid-state drive bracket with the screw holes on the solid-state drive assembly.

Passo 13 Replacing Screws  ¶ 

Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly.

Passo 13 Replacing Screws  ¶ 

  • Replace the screws that secure the solid-state drive bracket to the solid-state drive assembly.