Solio Rocsta Charging Cable Replacement
In this guide, we will show you how to change the charging cable of the Solio Rocsta.
- Autore: David Vazquez
- Stima il tempo: 10 - 25 minuti
- Difficoltà: Difficile
The Solio Rocsta's charging cable is the main connection for charging/using your device. In this guide, we will show you how to replace your charging cable if it no longer works or needs repairing.
Please note that this guide requires soldering. For more information on how to solder and desolder connections, please visit this guide.
Incorpora questa guida
Scegli una dimensione e copia il codice qui sotto per incorporare questa guida come un piccolo widget sul tuo sito / forum.
Passo 1 — Charging Cable ¶
Locate, and unscrew, the three 5.72 mm screws that hold down the top cover using the T6 Torx screwdriver.
Passo 2 ¶
Remove top cover.
Passo 3 ¶
Using the spudger, pry the battery off the back cover.
Passo 4 ¶
Unscrew the 5.66 mm screws attaching the circuit board to the case.
Passo 5 ¶
With the circuit board flipped, locate the battery connector.
Hold the component attached to the circuit board the battery is connected to and wiggle the cable out.
Passo 6 ¶
With a Soldering Iron, desolder the four cables that connect the charging cable to the circuit board.