Salta al contenuto principale
Aiuto

ASUS Q324UA-BHI7T17 Power & Volume Button PCB Board Replacement

A step by step guide on how to quickly and easily replace the ASUS Q324UA-BHI7T17 power & volume PCB board.

  • Autore: Scott Santiago
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Moderato

Sometimes a laptop will not turn on due to a broken or faulty power button PCB board. That means no information will be sent to the motherboard to turn on the laptop, however the board is also associated with the volume keys, therefore maybe it will turn on but the volume controls on the side will not work. If either of these things happen, follow this guide to replace the faulty power chip.

Passo 1 Power & Volume Button PCB Board  ¶ 

Remove the screw holding the Power chip in place and remove it using a Phillips head #0 screw driver.

Passo 1 Power & Volume Button PCB Board  ¶ 

  • Remove the screw holding the Power chip in place and remove it using a Phillips head #0 screw driver.

  • Screw length is 0.5 cm in length and 0.5 cm in diameter

Passo 2  ¶ 

Locate the ribbon connector connecting the power chip to the mother board. Simply lift up the black component and the ribbon connector should be released, then the power chip should pop out easily. Discard of the old power chip properly.

Passo 2  ¶ 

  • Locate the ribbon connector connecting the power chip to the mother board.

  • Simply lift up the black component and the ribbon connector should be released, then the power chip should pop out easily.

  • Discard of the old power chip properly.