Salta al contenuto principale
Aiuto

iPhone 8 Battery Disconnection

Solo Prerequisita

Solo Prerequisita

Per favore tieni conto che questa guida è solo un prerequisito per altre guide.

Prerequisite-only guide for disconnecting the iPhone 8 battery in preparation for a repair.

Prerequisite-only guide to disconnect the battery on an iPhone 8. The battery should always be disconnected before servicing any internal components.

Passo 1 Battery Disconnection  ¶ 

Remove four Phillips screws securing the lower display cable bracket to the logic board, of the following lengths: Two 1.3 mm screws

Passo 1 Battery Disconnection  ¶ 

  • Remove four Phillips screws securing the lower display cable bracket to the logic board, of the following lengths:

  • Two 1.3 mm screws

  • Two 2.8 mm screws

  • Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

  • Remove the bracket.

Passo 2  ¶ 

Use the point of a spudger to pry the battery connector out of its socket in the logic board. Bend the battery connector cable slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Passo 2  ¶ 

  • Use the point of a spudger to pry the battery connector out of its socket in the logic board.

  • Bend the battery connector cable slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.