Salta al contenuto principale
Aiuto

Samsung BD-F5900 DVD Disc Tray Replacement

This guide helps explain how to replace the DVD disc tray on the Samsung BD-F5900 Blu-ray player. In the event that the disc tray has failed.

  • Autore: Louis McKean
  • Stima il tempo: 10 minuti
  • Difficoltà: Facile

Is your Blu-ray player not able to play your favorite flicks due to a faulty disc drive? If so, all you need is a #1 Phillips screwdriver and this guide to show how to replace the DVD disc tray with a new one.

Passo 1 DVD Disc Tray  ¶ 

Remove the two ribbon cables from the Main Logic Board assembly by gently pulling up on the blue tab.

Passo 1 DVD Disc Tray  ¶ 

  • Remove the two ribbon cables from the Main Logic Board assembly by gently pulling up on the blue tab.

  • Be careful not to damage the ribbon cable by using too much force.

Passo 2  ¶ 

Using a #1 Phillips head screwdriver, remove the two 7.5 mm screws (one not shown) near the front that secures the disc tray to the chassis.

Passo 2  ¶ 

  • Using a #1 Phillips head screwdriver, remove the two 7.5 mm screws (one not shown) near the front that secures the disc tray to the chassis.

Passo 3  ¶ 

Push two small prongs on either side of disc tray inwards and push disc tray forward.

Passo 3  ¶ 

  • Push two small prongs on either side of disc tray inwards and push disc tray forward.

Passo 4  ¶ 

Remove disc tray

Passo 4  ¶ 

  • Remove disc tray