Introduzione

This is a guide to replace the wheels on the legs of the Zoomer Meowzies. Useful when needing to replace a broken wheel or simply for cleaning the wheels.

Parti

Nessuna parte richiesta.

Using the Triangle driver remove the four 7.5 mm screws.
  • Using the Triangle driver remove the four 7.5 mm screws.

  • The two front screws are deeper than the two on the back legs which may cause difficulties. These can be reached by putting the bit in first then carefully putting the driver on slightly (not all the way)

Aggiungi Commento

Turn the device so that the the device is on its side.
  • Turn the device so that the the device is on its side.

  • Hold the back and belly on the device and gently pull apart.

  • Pulling with too much force might damage a few cables inside, so caution is needed.

Aggiungi Commento

  • With insides exposed, grab leg and gently pull up and away from the body to detach them. Repeat for all legs needed.

Aggiungi Commento

  • Turn the Zoomer Meowzies leg to its side.

  • Using the Triangle driver remove the two bottom 7 mm screws.

Aggiungi Commento

  • Hold both sides of the leg and gently pull apart.

  • If pulled apart too forcefully the rest of the leg may sustain damage. Caution is advised.

Aggiungi Commento

  • Wheel should now be exposed. Pull wheel up and away from the rest of the leg to remove. Replace with new wheel if necessary.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Muataz Alahmadi

Membro da: 14/02/2018

193 Reputazione

2 Guide realizzate

Team

USF Tampa, Team S6-G2, Eyestone Spring 2018 Membro di USF Tampa, Team S6-G2, Eyestone Spring 2018

USFT-EYESTONE-S18S6G2

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 24