Zenithink ZTPAD ZT280 C91 Back Panel Replacement

Introduzione

Before you begin this guide, make sure to have the proper tools. You will need a spudger, and a phillips head #00 screwdriver. If you're having trouble with the battery in your device, removing the back panel is one of the first steps in replacing the battery.

Cosa ti serve

Passo 1 Back Panel

Zenithink ZTPAD ZT280 C91 Back Panel Replacement, Back Panel: passo 1, immagine 1 di 1

Remove the two screws on the bottom using a Phillips #00 screwdriver.
For differentiation purposes, these screws are 4mm long.

Traduci

Passo 2

Zenithink ZTPAD ZT280 C91 Back Panel Replacement: passo 2, immagine 3 di 3

Using a spudger, start prying the case apart by working around the edge slowly.
Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger.
While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed
Be careful to not damage the speaker cables, they will still be connecting both panels.