Aggiusta la tua roba Unisciti alla community Store

Zenbre SoundBank Z3 Speaker Grill Replacement

Introduzione

This guide can be used to take out a Zenbre SoundBank Z3 speaker grill in order to replace it with a new one.

Cosa ti serve

  1. Zenbre SoundBank Z3 Speaker Grill Replacement, Bottom Cover: passo 1, immagine 1 di 2 Zenbre SoundBank Z3 Speaker Grill Replacement, Bottom Cover: passo 1, immagine 2 di 2

    • Power off the SoundBank Z3.

    • Turn over the device.

    • Peel the silicone feet up to remove.

    • No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

    Modifica

  2. Zenbre SoundBank Z3 Speaker Grill Replacement: passo 2, immagine 1 di 1

    • Remove all eight of the 11 mm Phillips screws from the bottom of the device.

    Modifica

  3. Zenbre SoundBank Z3 Speaker Grill Replacement: passo 3, immagine 1 di 2 Zenbre SoundBank Z3 Speaker Grill Replacement: passo 3, immagine 2 di 2

    • Remove the bottom panel speaker using an iFixit opening tool.

    Modifica

  5. Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: passo 4, immagine 1 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: passo 4, immagine 2 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: passo 4, immagine 3 di 3

    • Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.

    • Remove the plastic panel.

    Modifica

  6. Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: passo 5, immagine 1 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: passo 5, immagine 2 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: passo 5, immagine 3 di 3

    • Remove the three silver Phillips screws from the plastic ring that holds the speaker in place.

    • Be careful not to rip out the speaker while taking out the screws

    • The same steps can be done on the other side of the speaker

    Modifica

  7. Zenbre SoundBank Z3 Speaker Grill Replacement: passo 6, immagine 1 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement: passo 6, immagine 2 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement: passo 6, immagine 3 di 3

    • First, remove the speaker from the motherboard, then remove the ring that held the speaker in place.

    • These are the joints that need to be soldered. Follow this guide link to help you remove the wires from the motherboard.

    • How To Solder and Desolder Connections

    Modifica

  8. Zenbre SoundBank Z3 Speaker Grill Replacement: passo 7, immagine 1 di 2 Zenbre SoundBank Z3 Speaker Grill Replacement: passo 7, immagine 2 di 2

    • With the plastic ring removed, the speaker should slide out easily.

    • Be careful not remove other components in the speaker

    • This will expose the speaker grill

    Modifica

  9. Zenbre SoundBank Z3 Speaker Grill Replacement: passo 8, immagine 1 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement: passo 8, immagine 2 di 3 Zenbre SoundBank Z3 Speaker Grill Replacement: passo 8, immagine 3 di 3

    • Now that the speaker has been removed, the plastic grill should be visible.

    • With a little bit of force they can be pushed out.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 444