Zeki TBQG884B Rear Case Replacement

Scritto Da: David Wyman (e 12 altri collaboratori)

Commenti: 0
Preferiti: 0

Difficoltà

Moderato

Passi

Tempo Necessario

10 - 15 minuti

Introduzione

Use this guide to replace the rear cover of your Zeki TBQG884B tablet, or as a prerequisite for repairs on any of the device's other internal components.

Strumenti

Phillips #1 Screwdriver

$5.49

Compra
iFixit Opening Tool

$1.99

Compra

Ricambi

Nessuna parte specificata.

Passo 1 Rear Case

Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.

Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.

Traduci

Passo 2

Place the tablet down so that the screen is facing away from you.

Place the tablet down so that the screen is facing away from you.
Insert the tip of your opening tool into the small gap between the gray and white plastic covering. Pry it open and you should hear the clips opening up.
Gently work your way around the perimeter of the tablet's edge.

Traduci

Passo 3

Remove any tape on the speaker and detach the speaker from the back plate.

Remove the back cover
Remove any tape on the speaker and detach the speaker from the back plate.
The speaker is connected to the motherboard by two soldered wires. Don't break them when you remove the speaker.