Aggiusta la tua roba Comunità Store

ZTE ZFive G LTE Front-Facing Camera Replacement

Introduzione

This guide provides the steps necessary to replace the front-facing camera on the ZTE ZFive G LTE.

Cosa ti serve

  1. ZTE ZFive G LTE Front-Facing Camera Replacement, Front-Facing Camera: passo 1, immagine 1 di 3 ZTE ZFive G LTE Front-Facing Camera Replacement, Front-Facing Camera: passo 1, immagine 2 di 3 ZTE ZFive G LTE Front-Facing Camera Replacement, Front-Facing Camera: passo 1, immagine 3 di 3

    • Using the opening tool, pry open the rear cover from the crease at the bottom left corner.

    Modifica

  2. ZTE ZFive G LTE Front-Facing Camera Replacement: passo 2, immagine 1 di 3 ZTE ZFive G LTE Front-Facing Camera Replacement: passo 2, immagine 2 di 3 ZTE ZFive G LTE Front-Facing Camera Replacement: passo 2, immagine 3 di 3

    • Remove the battery with an opening tool or fingernail.

    Modifica

  4. ZTE ZFive G LTE Front-Facing Camera Replacement: passo 3, immagine 1 di 1

    • Unscrew all 16 screws from the mid-frame J000 screwdriver.

    • Set the screws aside.

    Modifica

  5. ZTE ZFive G LTE Front-Facing Camera Replacement: passo 4, immagine 1 di 2 ZTE ZFive G LTE Front-Facing Camera Replacement: passo 4, immagine 2 di 2

    • Gently pull up the device body from the inside.

    • Make sure to pull on all four sides as shown here.

    Modifica

  6. ZTE ZFive G LTE Front-Facing Camera Replacement: passo 5, immagine 1 di 2 ZTE ZFive G LTE Front-Facing Camera Replacement: passo 5, immagine 2 di 2

    • Once the body is removed, you will see the front facing camera at the top right corner of the device.

    • Using an opening tool, lift up the protective clip on top of the camera's ribbon wire.

    Modifica

  7. ZTE ZFive G LTE Front-Facing Camera Replacement: passo 6, immagine 1 di 2 ZTE ZFive G LTE Front-Facing Camera Replacement: passo 6, immagine 2 di 2

    • Using angled tweezers, gently pull the ribbon wire up from the body.

    • With the ribbon wire out, you should be able to remove the camera.

    • If there is adhesive on the camera backing, it may require more force to pull the camera out.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 341