Salta al contenuto principale

ZTE Speed Motherboard Replacement

Cosa ti serve

  1. ZTE Speed Motherboard Replacement, Motherboard: passo 1, immagine 1 di 2 ZTE Speed Motherboard Replacement, Motherboard: passo 1, immagine 2 di 2
    • Pull off back cover at bottom right corner.

  2. ZTE Speed Motherboard Replacement: passo 2, immagine 1 di 2 ZTE Speed Motherboard Replacement: passo 2, immagine 2 di 2
    • Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

  3. ZTE Speed Motherboard Replacement: passo 3, immagine 1 di 2 ZTE Speed Motherboard Replacement: passo 3, immagine 2 di 2
    • With the plastic opening tool the spudger, gently pry off the inner back.

    • Be careful not to pry it off too hard, as it is just a plastic covering.

  4. ZTE Speed Motherboard Replacement: passo 4, immagine 1 di 1
    • Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

  5. ZTE Speed Motherboard Replacement: passo 5, immagine 1 di 3 ZTE Speed Motherboard Replacement: passo 5, immagine 2 di 3 ZTE Speed Motherboard Replacement: passo 5, immagine 3 di 3
    • Using the spudger, gently pry up all ZIF connectors

    • ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable

    • Using same spudger, gently pry up the orange flat top connector

  6. ZTE Speed Motherboard Replacement: passo 6, immagine 1 di 2 ZTE Speed Motherboard Replacement: passo 6, immagine 2 di 2
    • Carefully take off motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Garrett Barry

Membro da: 03/04/16

722 Reputazione

5 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 694