Aggiusta la tua roba Comunità Store

ZTE Blade Spark Screen Replacement

Introduzione

A step-by-step guide on how to replace the screen on a ZTE Blade Spark smartphone.

This guide is useful if the screen is cracked, has dead pixels, or is not displaying anything.

Please use caution and the necessary PPE if working with cracked screen glass.

Cosa ti serve

  1. ZTE Blade Spark Screen Replacement, Screen: passo 1, immagine 1 di 1

    • Place phone screen side down on a flat surface.

    Traduci

  2. ZTE Blade Spark Screen Replacement: passo 2, immagine 1 di 2 ZTE Blade Spark Screen Replacement: passo 2, immagine 2 di 2

    • Take an opening tool, and insert it between the phone's backplate and chassis.

    • Work the tool all the way around perimeter of the phone until the backplate is free.

    Traduci

  3. ZTE Blade Spark Screen Replacement: passo 3, immagine 1 di 1

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    Traduci

  4. ZTE Blade Spark Screen Replacement: passo 4, immagine 1 di 1

    • Remove the middle plate that was unscrewed from the previous step.

    • At this stage you should have 3 separate parts as shown.

    • For the next step you will be working on the middle part in this picture.

    Traduci

  6. ZTE Blade Spark Screen Replacement: passo 5, immagine 1 di 1

    • Take black covering off of battery.

    Traduci

  7. ZTE Blade Spark Screen Replacement: passo 6, immagine 1 di 2 ZTE Blade Spark Screen Replacement: passo 6, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Unclip fastener located in the red box. Blunt end tweezers are recommended for this process.

    Traduci

  8. ZTE Blade Spark Screen Replacement: passo 7, immagine 1 di 2 ZTE Blade Spark Screen Replacement: passo 7, immagine 2 di 2

    • Remove battery so you are left with the base of the phone, the battery, and the battery cover separated.

    Traduci

  9. ZTE Blade Spark Screen Replacement: passo 8, immagine 1 di 1

    • Remove the 4mm screws in the 2 red circles shown with the Phillips #00 screwdriver.

    Traduci

  10. ZTE Blade Spark Screen Replacement: passo 9, immagine 1 di 1

    • Heat all 4 sides of the piece with the iOpener to loosen adhesive.

    Traduci

  11. ZTE Blade Spark Screen Replacement: passo 10, immagine 1 di 2 ZTE Blade Spark Screen Replacement: passo 10, immagine 2 di 2

    • Now remove the screen from it's base using the opening tool.

    Traduci
Conclusione

Swap your old screen with your new screen. To reassemble your device with a new screen, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Solomon Barket

Membro da: 03/27/23

181 Reputazione

1 Guida realizzata

Distintivi: 2

Team

IUPUI, Team 1-3, Harley Spring 2023 Membro di IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

3 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 121