Aggiusta la tua roba Comunità Store

ZTE Blade Spark Rear-Facing Camera

Introduzione

Follow this guide to disassemble the ZTE Blade Spark device and replace the rear-facing camera.

  1. ZTE Blade Spark Rear-Facing Camera, ZTE Blade Spark Rear-Facing Camera: passo 1, immagine 1 di 1

    • First, apply heat evenly on the back cover using a heat sack to soften the adhesive.

    Traduci

  2. ZTE Blade Spark Rear-Facing Camera: passo 2, immagine 1 di 1

    • Now, carefully remove the back cover.

    Traduci

  3. ZTE Blade Spark Rear-Facing Camera: passo 3, immagine 1 di 1

    • Once opened, Locate and remove all exposed screws using a Phillips-Head screwdriver and set them aside.

    Traduci

  4. ZTE Blade Spark Rear-Facing Camera: passo 4, immagine 1 di 1

    • To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

    Traduci

  6. ZTE Blade Spark Rear-Facing Camera: passo 5, immagine 1 di 1

    • After removing the white plastic panel, you should see a black metal battery cover.

    • To remove the metal battery cover, remove the screws from the panel using a Phillips screwdriver if you have not yet done so.

    Traduci

  7. ZTE Blade Spark Rear-Facing Camera: passo 6, immagine 1 di 1

    • Then, simple lift to remove the metal battery cover.

    Traduci

  8. ZTE Blade Spark Rear-Facing Camera: passo 7, immagine 1 di 1

    • You have reached the Fingerprint Scanner, the device Battery, and Front Facing Camera.

    Traduci

  9. ZTE Blade Spark Rear-Facing Camera: passo 8, immagine 1 di 3 ZTE Blade Spark Rear-Facing Camera: passo 8, immagine 2 di 3 ZTE Blade Spark Rear-Facing Camera: passo 8, immagine 3 di 3

    • Proceeding with disassembly, next up is the top chipset which the Rear Facing Camera is attached to.

    • To detach the chipset and reach the Rear Camera, locate and disconnect five power connectors surrounding the top chipset (as shown in images).

    Traduci

  10. ZTE Blade Spark Rear-Facing Camera: passo 9, immagine 1 di 1

    • Once you have the power connectors disconnected from the top chipset, use a Phillips screwdriver to remove the final screw located at the very top of the chipset (as shown in image).

    Traduci

  11. ZTE Blade Spark Rear-Facing Camera: passo 10, immagine 1 di 1

    • Then, simply lift chipset from top and detach from the device frame.

    Traduci

  12. ZTE Blade Spark Rear-Facing Camera: passo 11, immagine 1 di 1

    • You have now reached the final replacement component of the device, the Rear Facing Camera!

    • For step-by-step instructions on replacing any of the device components covered throughout the disassembly process, check out our ZTE Blade Spark Replacement guides.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Hung Vu

Membro da: 01/24/18

632 Reputazione

1 Guida realizzata

Distintivi: 7

+4 altri distintivi

Team

Gateway, Team S1-G6, Johnson Spring 2018 Membro di Gateway, Team S1-G6, Johnson Spring 2018

GCC-JOHNSON-S18S1G6

2 Membri

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 20

Tutti i Tempi: 2,244