Aggiusta la tua roba Comunità Store

ZTE Blade Spark Battery Replacement

Introduzione

This guide goes through how to safely disassemble the ZTE Blade Spark and replace the battery. This device contains electrical components, and the repair should be preformed in a dry environment. Replacing your battery is easy and a great way to give your device a fresh start.

Cosa ti serve

  1. ZTE Blade Spark Battery Replacement, Battery: passo 1, immagine 1 di 1

    • Apply heat evenly on the back cover using the iOpener to soften the adhesive.

    Modifica

  2. ZTE Blade Spark Battery Replacement: passo 2, immagine 1 di 2 ZTE Blade Spark Battery Replacement: passo 2, immagine 2 di 2

    • Carefully remove the back cover using an opening tool.

    Modifica

  3. ZTE Blade Spark Battery Replacement: passo 3, immagine 1 di 1

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    • Gently remove the SIM card tray.

    Modifica

  4. ZTE Blade Spark Battery Replacement: passo 4, immagine 1 di 1

    • To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

    Modifica

  6. ZTE Blade Spark Battery Replacement: passo 5, immagine 1 di 1

    • Set the inner white panel to the side.

    Modifica

  7. ZTE Blade Spark Battery Replacement: passo 6, immagine 1 di 1

    • After removing the inner white panel you should see a black panel. Use a Phillips #00 screwdriver to remove the six 4.0 mm screws.

    Modifica

  8. ZTE Blade Spark Battery Replacement: passo 7, immagine 1 di 1

    • Remove the black panel, revealing the battery.

    Modifica

  9. ZTE Blade Spark Battery Replacement: passo 8, immagine 1 di 1

    • Disconnect the tab connecting the battery to the circuit.

    Modifica

  10. ZTE Blade Spark Battery Replacement: passo 9, immagine 1 di 1

    • Remove the battery from the device.

    Modifica

  11. ZTE Blade Spark Battery Replacement: passo 10, immagine 1 di 1

    • Place battery off to the side and retrieve new battery.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Andrew Bliss

Membro da: 03/27/23

181 Reputazione

1 Guida realizzata

Distintivi: 2

Team

IUPUI, Team 1-3, Harley Spring 2023 Membro di IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

3 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 17

Tutti i Tempi: 136