Introduzione

Learn how and where to unscrew the landing gear legs in order to replace broken ones, without breaking your drone more.

Parti

Nessuna parte richiesta.

Lift all drone arms up so you can access the landing gear easily.
  • Lift all drone arms up so you can access the landing gear easily.

Aggiungi Commento

Unscrew the 16.9 mm screw at the top of the landing leg with a Phillips #00 screwdriver.
  • Unscrew the 16.9 mm screw at the top of the landing leg with a Phillips #00 screwdriver.

    • Make sure the screw head is not stripped in the process.

      • If stripped, the whole leg, including the internal sensors, will need to be replaced.

Aggiungi Commento

  • Pull the landing leg out slowly and remove it from the device.

Aggiungi Commento

Conclusione

Your Yuneec Typhoon H should now be ready to fly safely again.

Un'altra persona ha completato questa guida.

Shasta Banchio

Membro da: 16/04/2018

127 Reputazione

1 Guida realizzata

Team

Cal Poly, Team S22-G3, Maness Spring 2018 Membro di Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 23

Tutti i Tempi: 112