Introduzione

This guide instructs you to replace the LED lights on your Yuneec Typhoon H drone. The LED lights are important for tracking where your drone is, when flying within line of sight and for other pilots to know where your drone is in the sky.

Parti

Nessuna parte richiesta.

This guide begins with the propeller already removed.
  • This guide begins with the propeller already removed.

Aggiungi Commento

Turn the drone upside down to have easy access to the prop arm.
  • Turn the drone upside down to have easy access to the prop arm.

  • Twist out the prop motor clockwise.

Aggiungi Commento

  • Unscrew two 4.9mm screws on the board using a Phillips #000 screwdriver.

Aggiungi Commento

  • Hold the LED board in one hand and pinch the plug at the connection to the board with the other hand.

  • Pull the plug out from the connection piece.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Claire Luce

Membro da: 16/04/2018

347 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S22-G3, Maness Spring 2018 Membro di Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 13

Tutti i Tempi: 70